Misc Specialist Primers

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A two component epoxy holding primer.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A two pack blast primer for Sherwin Williams Firetex intumescent coatings.

A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115

A water based steel galvanised steel aluminium brass copper railing garage doors non ferrous metals.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

Formerly Amercoat 139. A two component polyamide cured epoxy prefabrication primer.

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A Two-Component Aluminium Maintenance Paint For Use on Steel.

A primer for vinyl ester schemes over both steel and concrete.

A low viscosity Primer/Saturant for steel and concrete.

A two pack epoxy primer/finish offering corrosion protection in one coat.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

A solvent free, water based primer for correctly prepared steel.

A three pack tie coat for use with International Intersleek systems.

A grey, two component, moisture curing, low zinc silicate prefabrication primer suitable for automatic application on shot blasted steel plates.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A rapid dry primer for steel and galvanised surfaces containing anti-corrosive pigment and improves surface adhesion.