Sherwin Williams Envirolastic 940 DTM is a single coat, direct to metal, polyaspartic urethane, fast dry finish formulated to provide high build, high performance protection.
Sherwin Williams Envirolastic 940 DTM is a fast dry, polyaspartic urethane formulated to provide high build, high performance protection and gloss and colour retention applied using airless spray. Benefits include single coat application, apply direct to metal, corrosion resistant, high film build in one coat, cures quickly to improve productivity, and has outstanding application properties.
Recommended to be direct applied to properly prepared steel and galvanizing in industrial environments, replacing conventional epoxy/urethane systems. Ideal for maintenance or new construction applications. Suitable for use in USDA inspected facilities. Acceptable for use in high performance architectural applications.
Suitable for use in the Mining & Minerals Industry. Not recommended for electrostatic spray or air-assisted airless spray.
Prepare steel to Sa2½ (ISO8501-2007). Recommended cleanser / thinner No 13. Temperature: 1.6°C minimum, 49°C maximum (air, surface, and material). At least 3°C above dew point Relative humidity: 85% maximum.
- Finish: Gloss
- Dry Film Thickness: 150 - 225 microns
- Theoretical Coverage: 4.5m2 per litre for 150 microns, 3.0m2 per litre for 225 microns
- Drying Times: 3 hours at 10°C to touch, 7 hours to 3 months at 10°C to recoat
- Pot Life: 3 hours at 10°C
- Available in wide range colours available
- Available in 5 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.