Transgard TG116 is best suited for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes. Recommended curing temperature above 10°C. Extended drying times will be observed at lower temperatures. Macropoxy M905 is recommended alternative for low temperature application and curing.
Recommended application via brush or airless spray. Recommended cleanser / thinner no5 for thinning and no9 or no13 for cleaning. Recommended primer Transgard TG115. For overcoating with epoxy products (including self overcoating), the maximum recommended interval is 28 days at 23°C. For overcoating outside this interval, consult our technical team technical support for advice. Where a high degree of gloss and colour retention is required overcoat with Transgard TG168 or TG169 within 7 days at a minimum dft of 50 microns. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. Ensure surfaces to be coated are clean, dry and free from all surface contamination.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highwa...
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are requ...
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.