£7.75 delivery on orders excluding certain products & postcodes *
International Interplate 855
SKU
ID21073
Part A and B: UN1263 (Class: 3, Pk Grp: II)
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.
Available in 20 Litres in NQA857 Grey. Price on Application.
In stock
Product Description
International Interplate 855 is a two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.
Price On Application. Call our Sales Team for a price.
Best Uses
International Interplate 855 is suitable as a shop (pre-construction) primer for the protection of steel during fabrication and assembly. Suitable for use with controlled cathodic protection. For use at Newbuilding.
Resistant to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
Application
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination.
Preparation For New Building
Shop primers should be applied using automatic blasting/spraying equipment. Blast to a minimum of Sa2½ (ISO 8501-1:2007). Steel grit or a mixture of steel grit of particle size 0.6-1.0mm and steel shot of particles size 0.6-1.4mm are normally used to give a predominantly angular profile. Apply Interplate 855 before oxidation occurs. If oxidation does occur the entire oxidised area should be reblasted to the standard specified above. Ensure that the area is clean and dry prior to application of Interplate 855.
Material is supplied in 2 containers as a unit. Always mix a complete unit in the proportions supplied. Agitate Paste (Part A) with a power agitator, slowly add binder (Part B) while agitating. Allow to mix for at least 5 minutes, sieve through a 30-60 mesh screen before use. Continue stirring during use.
Technical Details
| Components: | Two Pack |
| Type: | Zinc Silicate |
| Finish: | Matt |
| Stock Colours: | NQA856 Grey |
| Tintable: | Possible upon request. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 472 g/L |
| Volume Solids: | 25% |
| Suitable Substrates: | For steel |
| Application Method: | Airless Spray, Brush, Conventional Spray, Roller |
| Theoretical Coverage: | 16.7 m2 per litre at 15 microns DFT, allow appropriate loss factors |
| Wet Film Thickness (WFT): | 60 microns |
| Dry Film Thickness (DFT): | 15 microns |
| Induction Time: | - |
| Pot Life: | 24 hours at 10°C |
| Touch Dry: | |
| Overcoatable: | |
| Hard Dry: | |
| Cleaner / Thinner: | International GTA820 (Winter Grade), International GTA840 (Summer Grade) |
| Shelf Life: | Part A - 12 months minimum from date of manufacture when maintained in protected storage at temperatures up to 25°C. Part B - 6 months minimum from date of manufacture at temperatures up to 25°C. Subject to reinspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. |
| Packaging: | Available in 20 Litres |
