Johnstone's Trade Quick Dry Zinc Phosphate Primer

SKU
ID17204
UN1263 (Class: 3, Pk Grp: III)
A versatile quick drying, single pack anti-corrosive primer for steel.
Available in 2.5 and 5 Litres
From £55.26 £46.05
In stock
Only %1 left
Product Description

Johnstone's Trade Quick Dry Zinc Phosphate Primer is a versatile quick drying, single pack anti-corrosive primer for steel. Suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application.

Best Uses

Johnstone's Trade Quick Dry Zinc Phosphate Primer is suitable as an anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates. This product is an ideal primer for overcoating with Johnstone’s Semi-Gloss Steel & Cladding Topcoat.

Application

To prepare Steel, blast clean to SIS-Sa 21/2 minimum or mechanically prepared to SIS-St 3 minimum. Previous suitable coats should be clean, dry and abraded if necessary. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.

Stir thoroughly before use. Easy to apply by brush.

Technical Details
Components: One Part
Type: Solvent Based
Finish: Matt
Stock Colours: Red Oxide, Grey and White
Tintable: No
VOC Content: 450.0g per Litre
Volume Solids: 34%
Suitable Substrates: An anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates
Application Method: Brush
Theoretical Coverage: 11 m2 per litre
Wet Film Thickness (WFT): 75 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Touch Dry:
Overcoatable: After 16 - 24 hours at 20°C
Fully Cured:
Cleaner / Thinner: Johnstones TC2 Thinner and Cleaner
Shelf Life: 5 years unopened
Packaging: Available in 2.5 and 5 Litres

Related Products