Sherwin Williams Transgard TG110 - Formerly Leighs

SKU
ID4131
Part A: UN1263 (Class: 3, Pk Grp: II), Part B: UN3469 (Class: 3.8, Pk Grp: II)
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
Available in 5 Litres in Cinnamon
£94.92 £79.10
In stock
Product Description

Sherwin Williams Transgard TG110 - Formerly Leighs is a zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces.

Best Uses

Transgard TG110 is best used as a temporary protective for steel surfaces prepared by abrasive blast cleaning. Suitable for use in conjunction with cathodically protected steel. Suitable for fabrication and for overcoating with most paints in common use except high content metallic zinc products

Application

Recommended application method via airless spray, conventional spray, roller or brush for small areas or touch up only. For optimum performance use round steel shot and blast clean to Sa2½ BSEN ISO 8501-1:2007). Average surface profile in the range 30-50 microns. Ensure surfaces to be coated are clean, dry and free from all surface contamination.

Recommended cleanser / thinner Sherwin Williams Thinner C5. Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned.

Technical Details

Approvals:

  • Highways Agency Item No. 110

Technical Info:

Components: Two Pack
Type: Zinc Phosphate Primer
Finish: -
Stock Colours: Cinnamon
Tintable: No
VOC Content: 584 gms/litre
Volume Solids: 36± 2%
Suitable Substrates: Steel
Application Method: Brush, Roller, Airless Spray or Conventional Spray
Theoretical Coverage: 14.4 m2/ltr*
Wet Film Thickness (WFT): 70 microns
Dry Film Thickness (DFT): 25 microns
Induction Time: -
Pot Life: 8 hours at 23°C
Touch Dry: 20 minutes at 23°C
Overcoatable: 4 hours at 23°C
To Handle: 2 hours at 23°C
Cleaner / Thinner: Cleanser Thinner:No 5
Shelf Life: 12 months from date of production unopened or 'use by' date where specified
Packaging: Available in 5 Litres