Teamac Zinc Rich Primer Cold Galvanising

SKU
id3615
UN1263 (Class: 3, Pk Grp: III)
A metallic zinc that allows conductivity in the dried film layer.
Available in 1 and 2.5 Litres in Grey
From £66.28 £55.23
In stock
Only %1 left
Product Description

Please note, the manufacturer is advising delivery will take a minimum of 5 days for delivery of this product.

Teamac Zinc Rich Primer (Cold Galvanising) is best used as a cold galvanising paint as protection against corrosion on zinc, aluminium, steel and iron.

Teamac Zinc Rich Primer (Cold Galvanising) Paint for Metals, is a high performing product based on a concentration of metallic zinc and allows for conductivity in the dried film layer. Used to offer protection to galvanised steel after cutting or grinding and as a sacrificial coating similar to Galvafroid to protect the steel.

Best Uses

Teamac Zinc Rich Primer (Cold Galvanising) is best used as a cold galvanising paint and can be used on a variety of different substrates, including, zinc, aluminium, steel and iron. Teamac Zinc Rich Primer is for use on iron and steel as protection against corrosion. The coating must be in direct contact with the iron or steel to work correctly.

Application

Teamac Zinc Rich Primer (Cold Galvanising) is available in 1 litre and 2.5 litre containers and can be applied using brush, roller or spray to produce a fantastic finish ready to protect any metal substrate.

Surface and Environment

Teamac Zinc Rich Primer (Cold Galvanising) can be used internally or externally for the priming of metal, ready for a decorative over coating. Teamac Zinc Rich Primer can be used internally or externally for cold galvanising.

Technical Details

Notes

  • Teamac Zinc Rich Primer (Cold Galvanising) contains a high concentration of metallic zinc and allows for conductivity in the dried film
  • Teamac Zinc Rich Primer (Cold Galvanising) acts as a 'cold galvanising' type paint

Technical Info

Components: Single Pack
Type: Cold Galvanising
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: 381 g/litre
Volume Solids: 56.8%
Suitable Substrates: Iron & Steel
Application Method: Brush or Airless Spray
Theoretical Coverage: 8 m2 / litre
Wet Film Thickness (WFT): 125 microns
Dry Film Thickness (DFT): 70 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: After 8 hours or overnight at 20°C
Hard Dry: 8 hours at 20°C
Cleaner / Thinner: Thinners 15 or Thinners 16
Shelf Life: -
Packaging: Available in 1 Litre and 2.5 Litres

Related Products