Jotun Penguard Express MIO

SKU
ID17016
UN1263 (Class: 3, Pk Grp: III)
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
Available in 5 and 20 Litres
From £83.26 £69.38
In stock
Only %1 left
Product Description

Jotun Penguard Express MIO is a primer, mid and finish coat for steel and concrete substrates in low temperature atmospheric environments.

This product is part of the Network Rail/Railtrack RT98 Systems M20, N4 and N9

This is a two component amine cured epoxy coating. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where short dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates. It can be applied at sub zero surface temperatures.

Best Uses

Jotun Penguard Express MIO is best used on structural steel and piping which is exposed to highly corrosive environments. Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.

Application

Jotun Penguard Express MIO can be used with an airless spray. Brush application is recommended for stripe coating and small areas. Refer to application manual on technical tab for instructions.

Surface and Environment

The Penguard Express MIO system is suitable for new constructions, prepared carbon steel, stainless steel, aluminium and concrete substrates and can be applied when temperatures are below 0°C.

Technical Details

Approvals

  • This product is part of the Network Rail/Railtrack RT98 Systems M20, N4 and N9
  • Certificate numbers XM92/M20-140, M20-179, XM92-162, XM92-163, XM92/M20-166, XN90/N4-077, XN90-084, XN90-85, XN90/N4-090, XN90/N9-065 and XN90/N9-066

Technical Info

Components: Two Part
Type: Amine cured epoxy coating
Finish: Matt
Stock Colours: Grey and Red
Tintable: No
VOC Content: 271.0g per litre
Volume Solids: 74%
Suitable Substrates: Suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates
Application Method: Airless Spray, Brush
Theoretical Coverage: 9.9 - 3m2 per litre
Wet Film Thickness (WFT): 100 - 340 microns
Dry Film Thickness (DFT): 75 - 250 microns
Induction Time: -
Pot Life: 2 hours at 23°C
Touch Dry: 2 hours at 10°C
Overcoatable: 8 hours at 10°C
Fully Cured: 8 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 17
Shelf Life: 24 months
Packaging: Available in 5 and 20 Litres

Related Products