£7.75 delivery on orders excluding certain products & postcodes *
PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.
This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.
PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2
PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.
PPG SigmaCover 435 is used within the following PPG systems:
See Data Sheets tab for System sheet downloadable PDF.
Components: | Two Part |
Type: | MIO |
Finish: | Eggshell |
Stock Colours: | Light Grey, Dark Grey, Green and Aluminium |
Tintable: | No |
VOC Content: | 344.0g per Litre |
Volume Solids: | 63% |
Suitable Substrates: | For steel and concrete |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 6.3 m2 per litre at 100 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 75 - 150 microns |
Induction Time: | - |
Pot Life: | 5 hours at 20°C |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | After 3 hours at 20°C |
Fully Cured: | 4 days at 20°C |
Cleaner / Thinner: | PPG Thinner 91-92 |
Shelf Life: | At Least 24 months when stored cool and dry |
Packaging: | Available in 4 and 20 Litres |