£7.75 delivery on orders excluding certain products & postcodes *
This multi purpose product is excellent as it can be used as an undercoat or topcoat and is part of the fantastic range of SigmaCover products that can also be used as a surface sealant.
PPG SigmaCover 522 can be used in industrial, coastal, or chemically contaminated conditions where pollution is of a high level.
Blast clean steel to ISO-Sa2 1/2. Substrate temperature during application and curing should be over 10°C. Mix base and hardener at temperatures preferably above 15°C. Thinner should be added after mixing the components.
Components: | Two Part |
Type: | MIO |
Finish: | Low Metallic Sheen |
Stock Colours: | Greenish Grey |
Tintable: | No |
VOC Content: | 374.0g per Litre |
Volume Solids: | 60% |
Suitable Substrates: | For metal surfaces |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 15 m2 per litre at 40 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 40 - 100 microns |
Induction Time: | - |
Pot Life: | 8 hours at 20°C |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | Between 8 hours and 1 month at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | PPG Thinner 91-92 |
Shelf Life: | 2 years unopened in original container |
Packaging: | Available in 20 Litres |