£7.75 delivery on orders excluding certain products & postcodes *
PPG SigmaLine 2500 has been designed to offer protection and decoration to the external of pipes and is extremely suitable for bell holing jobs. This product has been manufactured as a multi purpose substance to offer quality, protective finishes to a variety of steel coatings, with fast curing times when applied to pre heated surfaces.
PPG SigmaLine 2500 should be applied using a heavy duty twin feed hot airless spray to produce a smooth glossy finish with a theoretical coverage rate of 1.7m2 per litre, per coat. SigmaLine 2500 is touch dry after 30 minutes at 60°C, and reaches full cure after 3 hours at the same temperature.
PPG SigmaLine 2500 has been specifically designed for use on steel substrates that have been blasted ready for a protective, decorative coating. 2500 can be applied to surfaces with a temperature of up to 90°C and works to reduce the risk of fire and explosions in confined, hot environments.
Components: | Two Part |
Type: | Solvent Free |
Finish: | Gloss |
Stock Colours: | Dark Brown |
Tintable: | No |
VOC Content: | 125.0g per Litre |
Volume Solids: | 100% |
Suitable Substrates: | For metal pipe internals and externals |
Application Method: | Brush, Roller or Airless Spray |
Theoretical Coverage: | 1.7m2 per litre at 600 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 600 - 1000 microns |
Induction Time: | - |
Pot Life: | 5 minutes at 20°C |
Touch Dry: | 30 minutes at 60°C |
Overcoatable: | Between 3 hours and 1 month at 20°C |
Fully Cured: | 48 hours at 20°C |
Cleaner / Thinner: | Do not thin |
Shelf Life: | At least 24 months when stored cool and dry |
Packaging: | Available in 20 Litres |