Sika Sikagard 62 Drinking and Clean Water Storage

SKU
id9862
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN1760 (Class: 8, Pk Grp: III)
A two component, solvent-free, high build epoxy coating specifically developed for use in normal to moderately aggressive chemical environments.
Available in 5kg
From £232.58 £193.82
In stock
Only %1 left
Product Description

Sikagard® 62 Drinking and Clean Water Storage Steel Protection is a two component, solvent-free, high build epoxy coating specifically developed for use in normal to moderately aggressive chemical environments.

Best Uses

Sikagard® 62 Drinking and Clean Water Storage Steel Protection is ideal for lining storage tanks, silos and bund areas and offers excellent mechanical and chemical resistance for use in a wide range of other commercial and industrial environments. 

Application

Sikagard® 62 Drinking and Clean Water Storage Steel Protection can be applied using brush, roller or spray and can be overcoated after approximately 10 hours in normal dry conditions of 20°C. This product has a theoretical coverage rate of between 3-5m2 per Kg at 150 microns DFT.

Surface and Environment

Sikagard® 62 Drinking and Clean Water Storage Steel Protection is available only in pebble grey for application to metal substrates, however other colours are available on request. As well as steel you can also apply this epoxy material to concrete, stone and other cementitious substrates to provide a coating that is impervious to liquids and chemicals. 

Sikagard® 62 is part of the extensive range of Sika Products available from Promain.

Technical Details

Notes

  • For use on concrete, stone, cementitious mortars and renderings (not polymer modified). Epoxy cements (EpoCem), epoxy mortars, iron and steel.
  • For linings to storage tanks and silos, bund areas.
  • As anti-corrosion coating in food-processing plants.
  • Also, sewage works, farms and agricultural enterprises, chemical and pharmaceutical plants, beverage industries and bottling plants.
  • Good chemical and mechanical resistance.
  • Easy to mix and work.
  • High-build.

Technical Info

Components: Two Part
Type: High Build Epoxy Resin
Finish:  
Stock Colours: Light Grey, Light Green
Tintable: No
VOC Content: < 500 g/l VOC
Volume Solids: 100%
Suitable Substrates: Chemical resistant protective layer on concrete, stone, cementitious mortars and renderings, epoxy cement, epoxy resin based products and steel
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: Approx 0.30 Kg per m2 per layer
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 150 microns
Induction Time: -
Pot Life: 20 minutes at 20°C
Touch Dry: -
Overcoatable: Between 10 hours and 2 days hours at 20°C
Fully Cured: 10 days at 20°C
Cleaner / Thinner: Sika Thinner C
Shelf Life: 12 months unopened
Packaging: Available in 5 Kg

Related Products