£7.75 delivery on orders excluding certain products & postcodes *
If you are looking for structural steel paint then make sure that you take a look at the wide range of products that we have available here at Promain. Our range of structural steel paint are perfect for use on structures that require extreme durability due to the harsh conditions that they are subjected too and they also have a life expectancy of 25 years so you can be sure that they are high performance products that are definitely a value for money. Here at Promain we would only ever make sure that we stock the very best products from only the most trusted manufacturers in the business who we know constantly provide the very best products possible when it comes to structural steel paint.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
A 2 pack structural steel and piping coating that will continue to cure while immersed.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.
A two pack topcoat especially for objects exposed to heavy abrasion and chemical attack.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A VOC compliant, single component, water based anti-corrosive primer/finish.
A single component, water based acrylic finish for use in industrial environments.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.
A functional coating for identification of hot spots and internal insulation failures.
A high performance 2 pack epoxy for industrial use. Suitable for CUI. Low temperature curing down to -6°C.
An advanced isocyanate free topcoat with outstanding high gloss and colour retention for exterior exposures.
Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.