Rustoleum 7500 Alkythane MATT is a Lead Free high quality, corrosion resistant, topcoat developed for application to a variety of metals, even in low temperature environments.
Rustoleum Mathys 7500 Alkythane MATT is a corrosion resistant top coat developed for use to low temperatures on metal. This metal top coat paint is enriched with rust-resistant pigments and so provides sufficient corrosion protection in just one coat on already painted surface in light industrial settings, a second coat provides protection in more aggressive industrial environments.
Rustoleum 7500 Alkythane MATT is a high quality, corrosion resistant, topcoat developed for application to a variety of metals, even in low temperature environments. Rustoleum 7500 Alkythane MATT has been designed especially to provide protection after just one coating.
Rustoleum 7500 Alkythane MATT has been manufactured for use in most industrial settings, containing rust-resisting pigments for excellent corrosion protection. This product can be used to protect metals in a light industrial exposure with just one coating, however two coatings should be applied for use in more aggressive industrial environments.
Rustoleum 7500 Alkythane MATT can be applied using brush, roller or spray and has a theoretical coverage rate of 10m2 per litre, available in a variety of bright, decorative colours and shades. Rustoleum 7500 Alkythane MATT offers quick drying capabilities, being touch dry after just 2 hours allows for a fast return to service, and can be recoated after 16 hours if necessary, for use in harsher conditions.
Surface and Environment
Rustoleum 7500 Alkythane MATT is ideal for use externally and internally, and cures even at low temperatures down to 5°C. Even at these temperatures, 7500 Alkythane is still dry to touch after 2 hours. With excellent corrosion protection and UV resistance, this product is highly suited for application to structural steel found outdoors, and can be applied to zinc, copper and a variety of plastics too.
- Even at 5C Alkythane 7500 is touch dry after 2.5 hours
- Reaches 90% of its protective effect in a short time
- Lead Free
- Full opacity and protection in just one coat.
- Less coats necessary for equal anti-rust protection.
- Designed for application at low temperatures.
- Urethane modified alkyd provides good UV resistance and gloss retention.
- Harder wearing than Combicolor
- Contains rust inhibitive pigments
- Use Galvinoleum 3202 on galvanised steel, zinc, copper and many plastics
- prior application of a Rustoleum alkyd primer will increase durability.
|Type:||High performance anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C)|
|Stock Colours:||Black and White|
|Tintable:||Not in Matt|
|VOC Content:||392.0g per Litre|
|Volume Solids:||50 - 53%|
|Suitable Substrates:||For metal surfaces, or primers 769, 569, 1060 or 3202|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||10.5 m2 per litre|
|Wet Film Thickness (WFT):||95 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160 or mineral spirits|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.