£7.75 delivery on orders excluding certain products & postcodes *
Sherwin Williams Macropoxy M455V2 is suitable for use in marine, chemical or other aggressive environments, but not immersed conditions.
Blast clean surfaces to Sa2 1/2 BS EN ISO 8501-1:2007. Average surface profile should be in the range of 50-75 microns. Ensure all surfaces to be coated are clean, dry and free from all surface contamination. May also be applied over a wide range of pre fabrication primers. Suitable for application via airless spray or conventional spray.
Brush application is suitable for small areas or touch up purposes. Application of more than one coat may be necessary to give equivalent DFT to a single spray applied coat.
Components: | Two Part |
Type: | Epoxy |
Finish: | - |
Stock Colours: | White |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 304 gms/litre |
Volume Solids: | 65 ± 3% |
Suitable Substrates: | Structural Steel |
Application Method: | Airless Spray or Conventional Spray |
Theoretical Coverage: | 5.2 m2/ltr* |
Wet Film Thickness (WFT): | 192 microns |
Dry Film Thickness (DFT): | 125 microns |
Induction Time: | - |
Pot Life: | 6 hours at 23°C |
Touch Dry: | 1½ hours at 23°C |
Overcoatable: | 4 hours at 23°C |
To Handle: | 16 hours at 23°C |
Cleaner / Thinner: | Thinner No 5 |
Shelf Life: | 2 years from date of production unopened or 'use by' date where specified |
Packaging: | Available in 5 Litres and 20 Litres |