£7.75 delivery on orders excluding certain products & postcodes *
Promain have a wide range of certified coatings for both internal tank linings and external works. Whether you are looking for coatings for the internals of grain and dry foodstuff silos or for storage of chemicals we have a range of approved products. Promain are proud to supply coatings suitable for use in the petrochemical industry for the transportation and storage of petrol, diesel, jet fuel, gasoline, crude oil and more. We also supply coatings for the inside of ballast tanks.
View our extensive selection of tank linings below from manufacturers including Sika, Sherwin Williams, PPG, International, Jotun and Hempel.
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.
A two pack topcoat especially for objects exposed to heavy abrasion and chemical attack.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
For corrosion protection for the internals of steel storage tanks, vessels, spools, pipes and rail cars.
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.
Provides corrosion protection for the internals of steel storage tanks and pipes for a range of products.
A new solvent-free epoxy phenolic lining that provides outstanding protection and maximum value.