£7.75 delivery on orders excluding certain products & postcodes *
PPG NovaGuard 4801 is best suited as a chemical resistant tank lining. Suitable for application on to new and old steel, or for application onto concrete on top of a PPG NovaGuard 4701.
Steel should be blast cleaned to ISO Sa 2 1/2 at a blasting profile of 50-75 microns. For concrete it should be initially coated with a suitable primer that is dry and free from any contamination. Apply using an airless spray.
Solvent: | Solvent Based (Novolac Vinyl Ester) |
Finish: | Flat |
Stock Colours: | White and Red |
Tintable: | No |
VOC Content: | |
Volume Solids: | 99% |
Suitable Substrates: | New or old steel, coated concrete |
Application Method: | Airless spray |
Theoretical Coverage: |
1.6m2 per litre for 500 microns 0.5m2 per litre for 1500 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 500 - 1500μm |
Pot Life: | 50 minutes at 20°C |
Touch Dry: | 18 hours at 1500 microns at 20°C |
Recoatable: | 2.5 - 48 hours at 20°C |
Full Cure | 3 days at 20°C |
Cleaner / Thinner: | Clean with PPG Thinner 50-02 |
Shelf Life: | At least 6 months when stored cool and dry |
Packaging: | 20 Litres |