£7.75 delivery on orders excluding certain products & postcodes *
PPG NovaGuard 890
SKU
ID3933
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2922 (Class: 8, Pk Grp: II)
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
Available in 20 Litres in Cream
£536.40
£447.00
In stock
Product Description
PPG NovaGuard 890 is a two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
890 works to reduce the potential of explosions and fires. This product is brought to you in light colours to improve visibility in low-vis environments.
Best Uses
PPG NovaGuard 890 is ideal for the coating of tanks that store unleaded petrol and offers excellent resistance to crude oil up to 90°C. Not only is NovaGuard 890 suitable for protection against crude oil but also offers high resistance to a wide range of chemicals and solvents. Resistant to jet fuel and kerosene.
Application
PPG NovaGuard 890 is part of the fantastic range of SigmaGuard products that can be applied using a heavy-duty single feed airless spray equipment. Novaguard 890 may also be applied using brush for touch ups and line markings. Once applied, the product will be touch dry after 8 hours ready for a second coating after a 24 hour period has elapsed.
Surface and Environment
PPG NovaGuard 890 can be used internally or externally on steel or blasted steel that has been primed with a suitable primer, SigmaGuard 260 or Sigmacover 280 are perfect solutions for providing an adhesive undercoat prior to the application of PPG NovaGuard 890.
Technical Details
| Components: | Two Part |
| Type: | Solvent Free, Amine Cured Novolac Phenolic Epoxy |
| Finish: | Semi Gloss |
| Stock Colours: | Cream |
| Tintable: | No |
| VOC Content: | 131.0g per Litre |
| Volume Solids: | 100% |
| Suitable Substrates: | For steel |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | 3.3 m2 per litre at 300 microns |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 300 microns |
| Induction Time: | - |
| Pot Life: | 1 hour at 20°C |
| Touch Dry: | 8 hours at 20°C |
| Overcoatable: | Between 24 hours and 2 months at 20°C |
| Fully Cured: | 6 days at 20°C |
| Cleaner / Thinner: | PPG Thinner 90-53 or PPG Thinner 90-83 |
| Shelf Life: | 12 months when stored cool and dry |
| Packaging: | Available in 20 Litres |
