Selemix 7-410 / 7-412 Epoxy Topcoat

Name: Selemix 7-410 / 7-412 Epoxy Topcoat
Brand: Selemix
SKU: ID25053
Price: 129.47 GBP
Availability: InStock

SKU

ID25053

UN1263 (Class: 3, Pk Grp: II)

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

Available in 5 and 20 Litres. Tintable to most RAL and BS shades.

From £129.47 £107.89

In stock

Only %1 left

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Details

Product Description

Selemix 7-410 Epoxy Topcoat is a 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

Please note, the Hardener is not included with this product. Compatible Hardener is Selemix 9-011.

Best Uses

Selemix 7-410 Epoxy Topcoat is recommended for the painting of industrial equipment and machinery, particularly those situated in an aggressive environment. However. Selemix 7-410 should not be used on exterior surfaces exposed to sunlight if a good level of colour stability is required.

Provides high chemical resistance
A versatile finish

Application

Prepare bare steel by sanding using P80 - 120 - 240 dry. Suitable for application over Selemix 7-413 or 7-414 Primers. Also suitable for application over sandblasted steel. Degrease substrate thoroughly prior to painting. Combine with compatible hardener and thinner as per data sheet. Apply via airless or conventional spray.

Please note, different gloss levels can be achieved through blending Selemix Epoxy Binder 7-410 Gloss and Selemix Epoxy Binder 7-412 Matt. Please see the Matting Chart for further information.

Technical

Technical Details

Components:	Two Pack
Type:	Epoxy Enamel Resin (Hardener sold separately)
Finish:	Gloss or Matt
Stock Colours:	Just tints
Tintable:	Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:
Volume Solids:
Suitable Substrates:	Over compatible Selemix primers, base steel or sandblasted steel.
Application Method:	Conventional, Airmix Spray, Electrostatic Spray
Theoretical Coverage:	6.8 - 7.6 m2 per litre at 50μm dry film thickness
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	50 microns
Induction Time:	-
Pot Life:	6 - 8 hours at 20°C
Dust Free:	30 - 40 minutes at 20°C
Overcoatable:	After 3 hour minimum to 24 hours at 20°C without flatting
Thorough Dry:	1 hour at 20°C
Cleaner / Thinner:	Selemix 1-410 or Selemix 1-400
Shelf Life:
Packaging:	Available in 5 and 20 Litres

Binder Matting Ratios

Product	Matt	Semi-Matt	Semi-Gloss	Gloss
Matt Epoxy Binder 7-412	800	600	500	-

Gloss Epoxy Binder 7-410	-	100	200	700

Selemix NPXX Tinting Bases	200	300	300	300

Gloss Level (60°)
Air Dried over Metal	10-15%	40-50%	75-85%	>90%

Air Dried over Primer	15-20%	55-65%	75-85%	>90%

Oven Dried over Metal	20-25%	50-60%	80-90%	>90%

Oven Dried over Primer	25-30%	65-75%	80-90%	>90%

Refer to TDS no:	522	522	522	520