Please note, all Selemix products have a delivery lead time of up to 10 days due to COVID-19.
Selemix 7-610 Fast Dry Synthetic Topcoat is a single pack that has excellent adhesion and a high gloss finish and is ideal for protecting ferrous steel and in particular agricultural and plant equipment.
Selemix 7-610 is part of Selemix range of single pack high gloss topcoats. The product has an excellent level of adhesion and is available in a large range of colours and can also be tinted to most RAL, BS and NCS colour codes. The paint is also fast drying meaning time taken on application and downtime can be reduced making significant cost savings.
When used as part of a Selemix paint system over an applicable primer, the 7-610 is ideal for application onto steel, black steel, light alloys, agricultural equipment, trailers, tractors, harvesters, ploughs, muck spreaders, rotavators, tillers, plant equipment, excavators, power barrows, screed pumps, earth movers, dumpers, cars, trucks, bicycles, motorcycle, steel structures plus many more.
Selemix 7-610 is best used as a topcoat over Selemix primers 7-810 and 7-820, when used as part of the this system the product is perfect for providing a high gloss finish and protection for items such as plant equipment, diggers, creed pumps, power barrows, fuel bowsers, excavators, dumpers, earth movers, agricultural equipment, trailers, ploughs, tillers, rotavators, harvesters, tractors, cars, trucks, motorcycles, steel, black steel, light alloys, previously coated steel, steel structures, welfare cabins, electrical cabins, machine tools, lathes, milling machines, drill presses, guillotines, workshop equipment, electrical cabinets, light industrial equipment plus many more.
7-610 Fast Dry Synthetic Single Pack Topcoat can be applied by both airless and conventional spray equipment, when applied at a 50 micron dry film thickness the 7-610 has a theoretical coverage of 6.2-7m2 per litre. Selemix 7-610 is best used as a topcoat Selemix primers 7-810 and 7-820 for best result it is recommended that 2 coats are applied.
7-610 will require thinning with either Selemix Thinners 1-215 or 1-205 prior to application at general ratio of 10 to 1 for airless sprayers and 7 to 2-3 for conventional sprayers, please consult product technical data sheet for applicable ratio before use.
- Top coat
- High Gloss Finish
- Single pack
- Solvent based polyurethane
- Theoretical coverage of 6.2-7 m2 per litre when applied at a 50 micron dry film thickness
- Available in large range of colours
- Tintable to most RAL, BS & NCS colour codes
- Touch dry 4-5 hours at 20° Celsius
- Fully cured 24-48 hours at 20° Celsius
- Recoatable without sanding minimum of 6 days – maximum of 1 month at 20 degrees
- Recoatable after 1 day at 20° Celsius with the addition of 10% Selemix Hardener 9-510 in the topcoat ready to spray
- Compatible thinners Selemix 1-215 & 1-205 Compatible primers Selemix 7-810 & 7-820
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.