About 2 Pack Epoxy Paint

2 pack epoxy paints are extremely tough and durable coatings that can be used for large variety of applications and applied to substrates such as steel and concrete.

Below, you will find a comprehensive selection of the very best 2 pack epoxy paints available on the market, with a range of coatings suitable for providing protection against humidity and moisture, as well as rust, strong chemicals, acids, alkalis and solvents. Products can be applied using brush, roller or spray, with a wide range of epoxy paint colours to choose from.

Items 1 to 28 of 50 total

Page:
  1. 1
  2. 2

Sherwin Williams Dura-Plate 301S Edge Retentive Epoxy

Sherwin Williams Dura-Plate 301S Edge Retentive Epoxy

A solvent free, surface and humidity tolerant two pack modfied surface tolerant epoxy for use over prepared steel.

From £67.27 (£80.72 Inc VAT)
Zinga Zingaceram HS

Zinga Zingaceram HS

A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.

£103.50 (£124.20 Inc VAT)
Hempel Hempadur 45143

Hempel Hempadur 45143

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

From £38.58 (£46.30 Inc VAT)
Sherwin Williams Macropoxy 646 Epoxy Primer Finish

Sherwin Williams Macropoxy 646 Epoxy Primer Finish

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance p...

From £290.25 (£348.30 Inc VAT)
Sherwin Williams Macropoxy P200 Epoxy Glass Flake - Formerly Pipegard

Sherwin Williams Macropoxy P200 Epoxy Glass Flake - Formerly Pipegard

A high solids, 2 pack epoxy comprising of lead free colouring pigments, micronised glass flake and anti corrosive pigments.

£8,924.48 (£10,709.38 Inc VAT)
PPG Amerlock 2 C

PPG Amerlock 2 C

A two component, high solids epoxy coating for low temperature curing onto steel, concrete, masonry and non ferrous metals.

From £67.03 (£80.44 Inc VAT)
PPG Sigmashield 880 GF - Formerly Amerlock 880GF

PPG Sigmashield 880 GF - Formerly Amerlock 880GF

A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintena...

£465.03 (£558.04 Inc VAT)
Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish

Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

From £76.57 (£91.88 Inc VAT)
Sherwin Williams Acrolon 7300 Acrylic Urethane Gloss Finish

Sherwin Williams Acrolon 7300 Acrylic Urethane Gloss Finish

A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour r...

From £191.63 (£229.96 Inc VAT)
Sherwin Williams Dura-Plate 301K Surface Tolerant

Sherwin Williams Dura-Plate 301K Surface Tolerant

A solvent free, surface and humidity tolerant two pack modified epoxy that is anti corrosive for long service life steel p...

From £67.27 (£80.72 Inc VAT)
Sherwin Williams Dura-Plate 301W Surface Tolerant

Sherwin Williams Dura-Plate 301W Surface Tolerant

A low temperature curing, surface and humidity tolerant two pack modified epoxy for use as an anti corrosive coating for l...

From £72.75 (£87.30 Inc VAT)
Sherwin Williams Macropoxy C267V3 - Formerly Leighs Epigrip

Sherwin Williams Macropoxy C267V3 - Formerly Leighs Epigrip

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

From £54.69 (£65.63 Inc VAT)
Sherwin Williams Zinc Clad M501 Epoxy Zinc Rich Primer

Sherwin Williams Zinc Clad M501 Epoxy Zinc Rich Primer

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

From £133.85 (£160.62 Inc VAT)
Sherwin Williams Firetex M95/02 Epoxy Intumescent

Sherwin Williams Firetex M95/02 Epoxy Intumescent

An epoxy intumescent suitable for cellulosic fire protection for exterior blast cleaned steel.

£1,172.64 (£1,407.17 Inc VAT)
Sherwin Williams Firetex FX13381-1 Solvent Based Intumescent

Sherwin Williams Firetex FX13381-1 Solvent Based Intumescent

A single pack thin film intumescent coating to provide 120 minute of fire resistance to structural steel.

£312.96 (£375.55 Inc VAT)
Sherwin Williams Firetex FX2003 Solvent Based Intumescent Coating

Sherwin Williams Firetex FX2003 Solvent Based Intumescent Coating

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

From £312.96 (£375.55 Inc VAT)
Sherwin Williams Macropoxy M330 - Formerly Leighs Epigrip

Sherwin Williams Macropoxy M330 - Formerly Leighs Epigrip

A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel

£55.61 (£66.73 Inc VAT)
Sherwin Williams Firetex M95 - Formerly Leighs

Sherwin Williams Firetex M95 - Formerly Leighs

A durable, 2 pack epoxy intumescent coating suitable for cellulosic fire protection to blast cleaned steel.

£325.15 (£390.18 Inc VAT)
Sherwin Williams Acrolon C755V2 Primer Finish

Sherwin Williams Acrolon C755V2 Primer Finish

A high performance, 2 pack isocyanate and zinc free anti corrosive primer / finish.

From £73.40 (£88.08 Inc VAT)
Sherwin Williams Macropoxy M922 Epoxy Glass Flake - Formerly Leighs Transgard TG123 Epigrip M922

Sherwin Williams Macropoxy M922 Epoxy Glass Flake - Formerly Leighs Transgard TG123 Epigrip M922

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleane...

From £85.24 (£102.29 Inc VAT)
Sherwin Williams Macropoxy K267 Epoxy Undercoat MIO - Formerly Leighs Transgard TG121

Sherwin Williams Macropoxy K267 Epoxy Undercoat MIO - Formerly Leighs Transgard TG121

Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121

£249.83 (£299.80 Inc VAT)
Sherwin Williams Macropoxy M455V2 Epoxy Primer Finish - Formerly Leighs Epigrip M455V2

Sherwin Williams Macropoxy M455V2 Epoxy Primer Finish - Formerly Leighs Epigrip M455V2

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require f...

From £52.02 (£62.42 Inc VAT)
Sherwin Williams Macropoxy C401 MIO Undercoat - Formerly Leighs Epigrip

Sherwin Williams Macropoxy C401 MIO Undercoat - Formerly Leighs Epigrip

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

From £67.64 (£81.17 Inc VAT)
Sherwin Williams Macropoxy C402V2 Primer - Formerly Leighs Epigrip C402

Sherwin Williams Macropoxy C402V2 Primer - Formerly Leighs Epigrip C402

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of carbon steel surfaces.

From £64.21 (£77.05 Inc VAT)
Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

Finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is prec...

From £78.66 (£94.39 Inc VAT)
Sherwin Williams Zinc Clad J984 - Formerly Leighs Epigrip J984

Sherwin Williams Zinc Clad J984 - Formerly Leighs Epigrip J984

Used as an anti-corrosive protection of steel surfaces prepared by abrasive blast cleaning

From £78.57 (£94.28 Inc VAT)
Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip

Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

From £77.07 (£92.48 Inc VAT)
Sherwin Williams Firetex M90 - Formerly Leighs

Sherwin Williams Firetex M90 - Formerly Leighs

A two pack, solvent free, thick film epoxy intumescent coating that provides passive hydrocarbon fire protection for up to...

From £349.70 (£419.64 Inc VAT)

Items 1 to 28 of 50 total

Page:
  1. 1
  2. 2

More about 2 Pack Epoxy Paint

Due to their resistance to chemicals and solvents, coupled with excellent durability and abrasion resistance, 2 pack epoxies are ideal for providing floor coatings in demanding industrial environments, such as workshops, warehouses, factories and even nuclear decontamination facilities.

When combined with anticorrosive additives, 2 pack epoxy paints can be used to provide protection to steel in aggressive atmospheric environments, such as industrial and marine environments up to C5M-High rated as part of ISO 12944-6 tested systems.

Other specialist applications of 2 pack epoxy paints include WRAS approved tank linings, agricultural/automotive refinishing, the coating of submerged substrates (such as boat hulls, piers, off-shore structures), highways agency approved paint systems, plus many more.

Promain stock a vast range of 2 pack epoxy paints for many specialist applications from leading manufacturers PPG, Rustoleum, Selemix, Jotun, Coo-Var and Hempel.

If you need advice on the correct 2 pack epoxy paint product for your project, please contact our manufacture trained technical team who will be able to specify the best coating based on your requirements.