Coo-Var Hammercote Hammered Enamel Paint

SKU
ID3556
UN1263 (Class: 3, Pk Grp: III)
Hammered finish paint for trailers, metal, radiators, garden furniture, hammerite.
Available in 2.5 and 5 Litres
From £58.48 £48.73
In stock
Only %1 left
Product Description

Coo-Var Hammercote Hammered Enamel Paint is part of our range of fast drying Hammered Finish Paint formulated for use on metal to produce a metallic hammered finish.

Coo-Var Hammercote Hammered Enamel Paint can be used where a fast drying finish is needed and this product has outstanding drying properties that takes only 15 minutes to become touch dry at 20°C. It is a one coat system ideally suited for the decoration and protection of metal work. It is non yellowing, fast drying and oil and grease resistant when fully dried. All colours are lead free. 

Best Uses

Coo-Var Hammercote Hammered Enamel Paint is best used for providing a hammered finish and excellent protection to a variety of metal surfaces and is suitable for use on cars, radiators, trailers, fences, railings and garden furniture, tools, casings, metal furniture, gates and railings, interior and exterior. 

Application

Coo-Var Hammercote Hammered Enamel Paint can be applied directly onto any metal surface using brush, roller or airless spray, where a fast drying coat is required. Coo-Var Hammercote Hammered Enamel Paint has a theoretical coverage rate of 5-10m2 per litre and is available in 5 litre tins. High film build when brushing ensures excellent corrosion resistance. Recoating after 36 hours will cause the film to wrinkle.

Best results seen when all coats are applied in quick succession. After 36 hours, Hammercote cannot be recoated for up to 6 weeks. On galvanised surfaces, apply Teamac Etchcote TW. Allow to dry before painting.
 On aluminium surfaces, apply Teamac Etch Primer (2K).

Surface and Environment

Coo-Var Hammercote Hammered Enamel Paint is available in a variety of different metallic colours that produce a glossy hammered finish. Coo-Var Hammercote Hammered Enamel Paint provides surfaces with excellent corrosion resistance internally and externally. Hammered Finish Paints are used to provide decoration and protection to all kinds of metal equipment.

Technical Details

Features

  • Hammercote Hammered Enamel Paint is a fast drying coating giving a metallic hammered finish to metal objects
  • Hammercote is suitable for use on radiators, cars, trailers, fences, railings, tools
  • Use Hammercote Hammered Enamel Paint on any metalwork where a fast drying finish is required straight onto the surface
  • On galvanised surfaces, apply Etchcote TW - Allow to dry before painting
  • On aluminium surfaces, apply Etch Primer (2K). Allow to dry before painting. After 36 hours, recoating will cause the film to wrinkle. Leave for minimum 6 weeks before overcoating
  • Do not apply when RH exceeds 88% or the surface is less than 2°C above dew point
  • Drying will be affected in cold conditions

Technical Info

Components: One Part
Type: Solvent Based
Finish: Gloss
Stock Colours: 8 colours, black and silver
Tintable: No
VOC Content: 467 - 555.0g per Litre
Volume Solids: 41%
Suitable Substrates: For metal surfaces
Application Method: Brush or Airless Spray
Theoretical Coverage: 10m2 per litre at 40 - 45 microns
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 40 - 45 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: -
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinner 15
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 2.5 and 5 Litres

Related Products