£7.75 delivery on orders excluding certain products & postcodes *
Promain UK Limited offer a vast range of metal primers suitable for application to all types of metal surfaces.These metal primers will help prepare the material before painting as well as ensuring that there will be a better adhesion for the paint when applied to the surface. Primers also increase the durability of the paint as well providing the metal with an extra layer of protection. The range of metal primers that we have at Promain are available so that we can be sure that you are getting the very best primer depending on the surface that you are painting. Promain supply metal primers that come in a range of application methods, whether this is applied with a brush, roller, airless spray or an aerosol paint we have the perfect application method for you depending on your requirements.
A two pack epoxy, high solids, zinc phosphate primer or primer/finish for steelwork.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.
Formulated for application to exposed metal substrates prior to the application of Sika Liquid Plastics Roofing and Balcony Waterproofing System.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A surface tolerant, one pack primer. Compatible with a wide range of International finishes.
A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-pack, solvent-based epoxy resin, containing rust-inhibitive pigments, lead and chromate free.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
Provides protection for bare or blasted metal and has maximum durability under severely corrosive conditions.
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.