Rustoleum 7500 Alkythane SATIN

SKU
id9963
UN1263 (Class: 3, Pk Grp: III)
7500 Alkythane SATIN Lead Free anti-rust, corrosion resistant, top coat suitable for metal and plastic can be applied between 5 and 35 C.
Available in 5 Litres. Tintable to a huge range of colours.
From £99.18 £82.65
In stock
Only %1 left
Product Description

Rustoleum 7500 Alkythane SATIN is a Lead Free high quality, corrosion resistant, topcoat  for application to metal even at low temperature.

Rustoleum Mathys 7500 Alkythane SATIN is a corrosion resistant top coat developed for use to low temperatures on metal. This metal top coat paint is enriched with rust-resistant pigments and so provides sufficient corrosion protection in just one coat on an already painted surface in light industrial settings, a second coat provides protection in more aggressive industrial environments.

Rustoleum 7500 Alkythane SATIN is a high quality, corrosion resistant, topcoat developed for application to a variety of metals, even in low temperature environments. Rustoleum 7500 Alkythane SATIN has been designed especially to provide protection after just one coating.

Rustoleum 7500 Alkythane is also available in a Gloss finish.

Best Uses

Rustoleum 7500 Alkythane SATIN has been manufactured for use in most industrial settings, containing rust-resisting pigments for excellent corrosion protection. This product can be used to protect metals in a light industrial exposure with just one coating, however two coatings should be applied for use in more aggressive industrial environments.

Application

Rustoleum 7500 Alkythane SATIN can be applied using brush, roller or spray and has a theoretical coverage rate of 10m2 per litre, available in a variety of bright, decorative colours and shades. Rustoleum 7500 Alkythane SATIN offers quick drying capabilities, being touch dry after just 2 hours allows for a fast return to service, and can be recoated after 16 hours if necessary, for use in harsher conditions.

Surface and Environment

Rustoleum 7500 Alkythane SATIN is ideal for use externally and internally, and cures even at low temperatures down to 5°C. Even at these temperatures, 7500 Alkythane is still dry to touch after 2 hours. With excellent corrosion protection and UV resistance, this product is highly suited for application to structural steel found outdoors, and can be applied to zinc, copper and a variety of plastics too.

Technical Details

Features

  • Even at 5C Alkythane 7500 is touch dry after 2.5 hours
  • Reaches 90% of its protective effect in a short time
  • Lead Free
  • Full opacity and protection in just one coat.
  • Less coats necessary for equal anti-rust protection.
  • Designed for application at low temperatures.
  • Urethane modified alkyd provides good UV resistance and gloss retention.
  • Harder wearing than Combicolor
  • Contains rust inhibitive pigments
  • Tintable to thousands of different colours.
  • Use Galvinoleum 3202 on galvanised steel, zinc, copper and many plastics
  • prior application of a Rustoleum alkyd primer will increase durability.

Technical Info

Components: One Part
Type: High performance anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C)
Finish: Satin
Stock Colours: Black
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 392.0g per Litre
Volume Solids: 50 - 53%
Suitable Substrates: For metal surfaces, or primers 769, 569, 1060 or 3202
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 10.5 m2 per litre
Wet Film Thickness (WFT): 95 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Rustoleum Thinner 160 or mineral spirits
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Packaging: Available in 5 Litres

Related Products