£7.75 delivery on orders excluding certain products & postcodes *
MIO (Micaceous Iron Oxide) paints provide protection of structural steel by incorporating flakes that act as fish scales within the paint formula. Due to the scale like formation, the steel is protected by a shiny barrier that protects against water ingress, UV light and degradation of the steel surface.
As standard, the natural colour of MIO pigment is a dark, charcoal grey. Some MIO coatings also contain aluminium flake (another lamellar pigment) to lighten the colour. MIO coatings are formulated for high performance in harsh environments such as steel bridges, oil rigs and offshore environments.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
A two component high build micaceous iron oxide pigmented polyamide cured recoatable epoxy coating.
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
A single pack, MIO coating for use on ferrous metals. Ideal for metal gates and railings.
Provides rapid cure and overcoating even under low temperature conditions.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
For long-term protection of hot pipework, equipment and other hot surfaces.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.