PPG SigmaCover 410 MIO

SKU
id3890
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469, (Class: 3, Pk Grp: II)
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
Available in 20 Litres
From £368.02 £306.68
In stock
Only %1 left
Product Description

PPG SigmaCover 410 is a two component, high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures exposed to atmospheric land or marine conditions.

Best Uses

PPG SigmaCover 410 is best used to provide durability to a variety of different substrates and can be recoated with various two component and conventional coatings even after long weathering periods.

Application

PPG SigmaCover 410 is easy to apply using airless spray for a theoretical coverage rate of 10.6m2 per litre. Once you have applied the product, it will be touch dry in just 3 hours ready for an overcoating after 10 hours.

Surface and Environment

PPG SigmaCover 410 is suitable for use in coastal and industrial environments and can be used on structural steel and concrete appliances to produce a dark grey, light grey or off white finish.

Technical Details

Approvals

This product is part of the following systems:

  • Network Rail System N4 (XN90) at 125 microns DFT
  • Network Rail System M20 (XM92) at 125 microns DFT
  • Norsok M-501 System 1 (Pre Qualified)
  • Norsok M-501 System 2B
  • Norsok M-501 System 6A
  • Norsok M-501 System 6B

Technical

  • Two component high solids, high build, polyamide cured epoxy coating
  • General purpose epoxy build coat in protective coating systems for steel and concrete structures exposed to atmospheric land or marine conditions
  • Excellent durability
  • Can be recoated with various two component and conventional coatings even after long weathering periods
  • Easy application by airless spray
Components: Two Component
Type: Cured Epoxy Coating
Finish: Flat
Stock Colours: Light Grey MIO, Dark Grey MIO, Off White
Tintable: No.
VOC Content: 240.0 g/l
Volume Solids: 80 +/- 2%
Suitable Substrates: Steel & Concrete Structures
Application Method: Brush, Roller, Airless Spray or Air Spray
Theoretical Coverage: 10.7 m2 at 75 micron
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 75-200 microns (3.0 - 8.0 mils) depending on system
Induction Time: None
Pot Life: 6 hours at 20°C
Touch Dry: 3 hours at 20°C
Overcoatable: After minimum of 8 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: PPG Thinner 91-92
Shelf Life: Base at least 12 months, Hardener at least 24 months - when stored cool and dry
Packaging: Available in 20 Litres

Related Products