£7.75 delivery on orders excluding certain products & postcodes *
M20 (XM92 and XM93) Certified
A protective system for existing structures using epoxy – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
Shop By
Filter by
-
Sherwin Williams Macropoxy M902 - Formerly Leighs Epigrip M902An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
-
Hempel Hempathane 55810 HSA two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
-
Hempel Hempadur 15570Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
-
Jotun Hardtop XPA hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
-
Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
-
Jotun Barrier 80A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
-
Jotun Jotamastic 80 AluminiumA two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
-
Jotun Penguard HSPA two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
-
Jotun Jotamastic 90A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
-
-
International Interthane 990A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
-
International Intercure 99A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
-
International Interthane 870A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
-
International Intercure 324A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
-
International Intercure 384 MIOA two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
-
International Interseal 670HSFor use on a wide variety of substrates including hand prepared rusty steel.
-
Jotun BarrierA low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
-
Jotun Penguard Express B12A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
-
Hempel Hempadur Zinc 17360A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
-
Jotun Penguard Express MIOA two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
-
Jotun Penguard ExpressA two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
-
Hempel Hempadur Mastic 45880A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
-
Hempel Hempaxane Light 55030A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
-
Sherwin Williams Acrolon C137V2 - Formerly Resistex & Transgard TG168A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
-
Sherwin Williams Macropoxy M905 - Formerly Leighs Epigrip M905A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
-
Hempel Hempathane HS 55610A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
-
Sherwin Williams Macropoxy C401 MIO Undercoat - Formerly EpigripA 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
-
Sherwin Williams Macropoxy C402V2 Primer - Formerly Leighs EpigripA high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...