£7.75 delivery on orders excluding certain products & postcodes *
A protective system for existing structures using epoxy – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
For use on a wide variety of substrates including hand prepared rusty steel.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...