£7.75 delivery on orders excluding certain products & postcodes *
Protective systems for existing structures using epoxy glassflake – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123
Offers long term protection in areas subject to wear and tear and can be applied in temperatures down to 10°C.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.