Carboline Carbomastic 15 LT

SKU
id23785
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.
Available in 5 and 20 Litres in Aluminium
From £100.55 £83.79
In stock
Only %1 left
Product Description

Carboline Carbomastic 15 LT is a two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

Formerly Nullifire PM015 Two Pack Aluminium Epoxy Primer.

Best Uses

Carboline Carbomastic 15 LT is a high build coating with excellent adhesion to rusted steel and most aged coatings. This product is recommended for painting over rusted steel where hand cleaning only is possible and will penetrate through rust to steel substrate and stops further corrosion and
undercutting.

  • Surface tolerant
  • Fast curing at low temperatures
  • High solids give good coverage and reduced solvent emission

Carboline Carbomastic 15 LT is an excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures etc.

Carboline Carbomastic 15 LT is part of the large range of Fire Retardant and Intumescent Coatings available from Promain.

Application

May be used over most generic types of coatings which are tightly adhering to the substrate, including organic- and inorganic zinc primers. Blast steel via hand or power tool cleaning is acceptable standard in many cases to remove non adhering paint and rust. Alternatively, ultra high pressure water jetting to Nace No. 7 min. C Vis WJ-2. Max flash rust; C Vis WJ-2M.

Apply via brush or roller for touch up only. Otherwise, please apply via airless spray.

Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

 

Technical Details
Components: Two Pack
Type: Modified Epoxy Mastic
Finish: Semi Gloss
Stock Colours: Aluminium
Tintable: No
VOC Content:  
Volume Solids: 86%
Suitable Substrates: Steel
Application Method: Brush, Roller for touch up. Apply Airless Spray
Theoretical Coverage: 5.7m2 per litre at 150 microns
Wet Film Thickness (WFT): 115 - 350 microns per coat (normally 175 microns)
Dry Film Thickness (DFT):

100 - 300 microns (3.94 - 11.81mils) per coat

Induction Time: -
Pot Life: 1 hour 30 minutes at 20°C
Surface Dry:  
Overcoatable: After 6 hours at 20°C
Fully Cured: 3 days at 20°C
Cleaner / Thinner: Carboline Thinner No2 or Carboline Thinner No25 EU
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 5 and 20 Litres

Related Products