Nullifire PM018 Primer or Top Seal Epoxy Coating

SKU
id17656
Part A and Part B: UN1263 (Class: 3, Pk Grp: II)
A two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments.
Available in 20 Litres
£450.35 £375.29
In stock
Product Description

Nullifire PM018 Primer or Top Seal Epoxy Coating is a two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments. Also formulated to protect base coats.

Best Uses

Nullifire PM018 Primer or Top Seal Epoxy Coating is suitable as either a high corrosion resistant primer or as a protective top seal in a Nullifire intumescent system. PM018 is easy to apply using airless spray equipment. This protects base coated steel in transit from factory to site. Suitable for areas C1, C2 and C3.

Application

Nullifire PM018 is recommended to be applied via airless spray equipment. Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details
Components: Two Part
Type: Solvent Based Intumescent
Finish: Semi Gloss
Stock Colours: RAL 9002 - Grey White
Tintable: No
VOC Content:
Volume Solids: 85%
Suitable Substrates: For steel in corrosive environments
Application Method: Airless Spray, Brush or Roller
Theoretical Coverage: 4.9 m2 per litre at 175 microns
Wet Film Thickness (WFT): 205 microns
Dry Film Thickness (DFT): 175 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry:
Overcoatable: After 4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Nullifire FC002 Thinner
Shelf Life: 24 months when stored as recommended in original unopened container at 24°C
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use