£7.75 delivery on orders excluding certain products & postcodes *
Owatrol ATM 007 Moss Cleaner is effective for use on a wide range of surfaces including stone, brick, slate, tile, shingles, concrete, fibre cement, plaster, plastic and more. The optimal timing for treatment is between April and December. This product is ideal for destroying moss in damp guttering, removing lichen from concrete and other stone work, preventing algae or growth on patios and paths, or treating moss growing on roof tiles.
Brush or scrape the surface to remove any debris, moss, lichen etc. that can easily be removed so that enough of the substrate is accessible.
For Curative Use: Apply generously diluted ATM 007 until saturation and foams thickened patches of lichens.Either wait 48 hours and then perform rinsing with high pressure cleaner (max. 50 bar pressure at minimum distance of 50 cm off the substrate so as to avoid damage). Do not rinse and let weather remove residues gradually. The effects will be visible under 10 to 15 days.
For Preventive Use: Apply generously diluted ATM 007 on the entire surface to be treated.
Components: | Single Pack |
Type: | Water Based |
Finish: | - |
Stock Colours: | Light Yellow |
Tintable: | No |
VOC Content: | n/a |
Volume Solids: | - |
Suitable Substrates: | Stone, Brick, Slate, Shingles, Concrete, Fibre-cement, Coatings, Plastic |
Application Method: | Brush, Roller, Pump Sprayer, Stainless Steel Spray Gun |
Dilutions: | Curative: 1 part ATM 007 to 9 parts water. Preventative: 1 part ATM 007 + 19 parts water. |
Theoretical Coverage: | Undiluted: 5m2/litre, Diluted: 50m2/litre |
Application: | See product data sheet for curative and preventative instructions |
Drying Time: | 48 hours |
Cleaner / Thinner: | Clean up with water |
Shelf Life: | 2 years minimum in original unopened packaging. |
Packaging: | Available in 1 Litre and 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.