Owatrol Owasail is a cleaner for removing rust, mould and algae staining from boat sails and other fabrics. Owasail will also remove limescale and clean mould and algae staining from gelcoats.
Owatrol Owasail is formulated as a marine cleaner for boat sails, boat covers, polyester fabrics in exterior applications. Owatrol Owasail is also ideal for the removal of dirt and algae from affected gelcoats on boats.
- Removes rust stain due to rusting deck equipment
- Dissolves and removes the build-up of limescale
- Cleans mould and algae stained surfaces
- Will not damage the surface
- Will not damage paintwork, varnish or wood stains in good condition
- Rinses with water
Cover everything you do not wish to treat. Do not apply in direct sunlight or to hot surfaces. Apply between 10°C (50°F) and 30°C (86°F). If in prolonged contact Owatrol Owasail can tarnish metal surfaces. Use appropriate protective clothing such as gloves and goggles. Always test on a small inconspicuous area first. Use as is - do not dilute.
Shake well before use. Wet surface with fresh clean water. Apply Owatrol Owasail with brush or roller (Long Pile). Scrub surface, paying particular attention to the dirtiest areas. Allow to work 15-20 minutes. Rinse with plenty of fresh clean water while scrubbing. Repeat procedure if required.
Do not use on aluminium.
|Type:||Water Based Gel|
|Suitable Substrates:||For sails, boat covers, gelcoats in exterior environments|
|Application Method:||Brush, Roller, Sponge or Stiff Synthetic Scrubbling Brush|
|Theoretical Coverage:||Depending on contamination|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Water|
|Packaging:||Available in 1 Litre|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.