Owatrol Owataud Awning and Cover Cleaner is a fast acting, easy to use product that cleans surfaces without damaging or altering the substrate.
Owatrol Owataud Awning and Cover Cleaner works by removing dirt, marks and stains due to grease, pollution, exhaust fumes. Owatrol Owataud is suitable for the cleaning of awnings and covers as well as artificial leather, vinyl, glass, biminis and more.
Suitable for exterior use on seating and cushions made of vinyl and artificial leather, sails, covers, dodgers, biminis, glass (translucent parts) or PVC. Also suitable for fabric surfaces (test on a small area first).
- Quickly and thoroughly removes dirt, marks and stains caused by air pollution, exhaust fumes, bad weather, residue from quay and wharf oils
- Cleans exhaust fumes, black marks and grease from dirty and stained sails
- Degreases and restores the treated surface to its original condition
- Fast acting and easy to use
- Does not damage or alter the cleaned surface
Apply using brush, cloth, scrubbing sponge or sprayer depending on substrate. Do not apply in direct sunlight or to hot surfaces. Apply between 10°C (50°F) and 30°C (86°F). Do not use wire brushes to scrub the surface. Protect surfaces you do not wish to treat. Always test on a small inconspicuous area first. Use appropriate protective clothing – Gloves, Goggles. Do not dilute.
Apply Owatrol Owataud Awning and Cover Cleaner to the surface using a brush or sprayer. Allow to work for 5 minutes. Rub surface with a clean cloth or scrubbing sponge. Rinse with fresh clean water. Repeat process if required. For very dirty surfaces soak cloth or scrubbing sponge in Owatrol Owataud Awning and Cover Cleaner and scrub on to surface in a circular motion. If surface is too hot, dampen with water to cool before applying Owatrol Owataud Awning and Cover Cleaner.
|Type:||Surfactants and high performance emulsified cleaner|
|Stock Colours:||Light Yellow|
|Suitable Substrates:||Awnings, Covers, Artificial Leather, Vinyl, Glass, Biminis, Seating and Cushions made of Vinyl and Artificial Leather. Sails, Covers, Dodgers, Biminis, Glass (translucent parts), PVC and Fabric surfaces (test on a small area first)|
|Application Method:||Brush, Cloth, Scrubbing Sponge, Sprayer|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Water|
|Shelf Life:||1 year|
|Packaging:||Available in 1 Litre|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.