Centrecoat R10 Paint Stripper is best suited for removing paint, varnish, graffiti, powder coating, Artex, stains and lacquer from a number of substrates including wood, timber, brick, stone, fibreglass and more. This product does not include restricted chemicals such as N-Methylpyrrolidone (NMP) and Dichloro-methane (DCM). R10 has a high level of penetration, enabling it to go deep into thick coatings and work from the substrate up. Gel consistency suitable for floors, walls and ceilings.
Ensure the area is fully dry. Protect all areas and items not to be stripped. Use direct from the container. Shake well prior to use. Layer onto the surface with a brush, airless spray or roller. Do not dilute. Apply a generous, even coat. Scrape off all residue after the designated time, leaving the surfaces as clean as possible. Clean surface thoroughly with clean water and reapply as necessary. Multi layers benefit from a second coat. If leaving overnight, the treated area can be covered with plastic sheeting to help the stripping process.
|Suitable Substrates:||For stripping paint, varnish, graffiti, pow-der coating, Artex®, stains, varnish and lacquer|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||10.5 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||95 microns|
|Dry Film Thickness (DFT):||50 microns|
|Cleaner / Thinner:||Water|
|Shelf Life:||Store away from frost and heat in a dry place: temperature between 5 °C and 30 °C. Provided the container is kept closed whilst not in use, and stored within the recommended temperature range, the storage life is 12 months|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Suitable for stripping wallpaper and removing paint.