Rustoleum Hard Hat NR.1 Greener Paint Stripper

SKU
id3538
Tin: UN1263 (Class: 3, Pk Grp: II), Aerosol: UN1950 (Class 2)
Paint Stripper for metal, wood and most mineral surfaces to remove oil paint quickly.
Available in 500ml Aerosols, 750ml and 2.5 Litre tins
From £14.84 £12.37
In stock
Only %1 left
Product Description

Use Rustoleum Hard Hat Greener Paint Stripper on metal, wood and most mineral surfaces to remove oil paint in a quick and easy process.

Rustoleum Hard Hat Greener Paint Stripper is designed to offer quick removal of tough paint coatings in a matter of minutes. Rustoleum Hard Hat Greener Paint Stripper is available in 0.75 litres and 2.5 litre containers as well as a unique aerosol 500ml can to allow for easy application and difficult to reach places.

Best Uses

Rustoleum Hard Hat Greener Paint Stripper is best used for stripping paints in most internal and external environment all the while remaining friendly to the environment. Rustoleum Hard Hat Greener Paint Stripper can be used to remove a variety of paints and products, including emulsions, alkyds, varnishes and most 2 component tough coatings.

Application

Rustoleum Hard Hat Greener Paint Stripper can be applied using a brush when purchased in the larger container or by simple spraying motion when you select the smaller aerosol form. Rustoleum Hard Hat Greener Paint Stripper works by dissolving the product in question without the use on methylene chloride acids or alkalis, making it safer to use.

Surface and environment

Rustoleum Hard Hat Greener Paint Stripper can be used on all vertical, horizontal and sloping surfaces with varying substrates. Use Rustoleum Hard Hat Greener Paint Stripper on metal, wood and most mineral surfaces to remove oil paint in a quick and easy process.

Technical Details

Notes

  • Remove paint in just minutes
  • Paint dissolving product, without the use of methylene chloride acids or alkali's
  • Better for you, better for the environment - 95% biodegradable
  • Aerosol version is a Unique foam product for difficult to reach places
  • Even usable on vertical substrates
  • Effective with alkyds, emulsions, varnishes and most 2-component coatings

Technical Info

Components: Single Pack
Type: Gel like paste, Dimethyl ether
Finish: -
Stock Colours: -
Tintable: No
VOC Content: 900 g/l
Volume Solids: -
Suitable Substrates: Metal, wood and most mineral surfaces 
Application Method: Brush or Aerosol
Theoretical Coverage: Can: 250 - 500 g/m² = 2 - 4 m²/l, Aerosol: 2-3 m² per aerosol
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Cleaner/Degreaser, Fresh Water or White Spirit
Shelf Life: 1 year
Packaging: Available in 500ml Aerosol, 750ml or 2.5 Litres 

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use