Bradite Epoxy Thinner TE36 is a high flash point solvent for thinning epoxy paints and equipment cleaning. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Bradite Epoxy Thinner TE36 is used for the thinning of epoxy paints as well as for equipment cleaning. Use as directed by product data sheets for thinning & cleaning.
Always refer to the Health and Safety sheet for the product before use, and observe the warning phrases on the label.
Certificates and Approvals
Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
|VOC Content:||920 g/L|
|Suitable Substrates:||Use as directed by product data sheets for thinning & cleaning|
|Flash Point (Abel Closed Cup):||32°C|
|Shelf Life:||12 months minimum in original unopened containers|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.