Fungicidal wash to clean algae, mould, lichen or moss from drives, paths, wood, walls and masonry surfaces before painting
Fungicidal wash is one of the treatments often overlooked by a lot of people who are wanting to paint their concrete driveways, tennis courts, balconies, roofs and any other wooden or masonry surface. The main purpose of fungicidal wash is to clean and protect the surface before it is painted - It really does help make the paint last a lot longer.
Kill off the infestation and prevent regrowth of moss, lichen, algae & mould
Where you have organic contamination such as algae, mould, lichen or moss, the fungicidal wash will kill off the infestation and prevent regrowth for a limited period of time. The idea is to then overcoat the surface that you have prepared with either a protective glaze, sealer or some form of paint. For example, when you're painting a roof the algae or mould will continue to grow underneath the roof tile paint if not treated properly with fungicidal wash. This can often cause blistering and flaking of the paint coating, which will only mean one thing, it will have to be repainted.
How should I apply fungicidal wash?
To apply the fungicidal wash dilute twenty to one and mixed with water. You then saturate the surface with the fungicidal wash and simply let it dry. Once that's done, the paint product can then be applied.
Uniquely to Promain, we offer the 5 litres of Centrecoat GS36 Fungicidal Wash. Once diluted twenty to one, this will give you about a hundred litres of solution ready to use, which is enough to treat an entire tennis court.
- Effectively kills spores of moss, mould and algae
- Enables decoration of treated surfaces with minimal risk of re-infection
- No fire or solvent vapour hazards during application or use
- Dilute 1:20 with clean water
- Highly concentrated - produces 105 litres when diluted
- Do not wash off before applying coating
|Finish:||Absorbed into substrate.|
|Suitable Substrates:||Paths, Roof Tiles, Patios, Tennis Courts, Driveways, Roofs, Bathroom or Kitchens ceilings, etc|
|Application Method:||Brush, soft cloth or spray|
|Theoretical Coverage:||Approx. 6-8m2 per litre when used on a smooth surface of average porosity|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Thinning:||Dilute in clean water. When 240ml of GS36 is diluted to a total volume of 5 litres in clean water|
|Drying Time:||Allow 24 hours between applications and before commencing appropriate decorative system|
|Cleaner:||Clean all equipment thoroughly with water immediately after use|
|Shelf Life:||1 year in original, unopened container, if stored in accordance with recommendations|
|Packaging:||Available in 240ml & 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.