Teknos Rensa Super is an efficient universal detergent for washing of all kinds of building surfaces and for pre-treating surfaces before painting.
Rensa Super can be used on all paint and constructional surfaces, and is suitable for both indoor and outdoor use. Rensa Super is an evaporating detergent, which is not necessary to rinse with water. Using the detergent is quick and easy: wipe of the dirt, let it dry for 5 minutes and paint.
Rensa Super is a ready-to-use solution, which is used undiluted. For slightly dirty surfaces or for objects, where the use of water is not possible, the cleaning can be done by Rensa Super wiping: moisten a sponge, cleaning cloth etc. with the detergent and wipe the surface clean. The surface can be painted right after the detergent has dried.
When cleaning very dirty or large surfaces use Rensa Super as traditional detergents: You should wet porous surfaces, such as untreated wood, plaster etc., with water before applying the detergent. This prevents the detergent from absorbing too much and drying too fast. Apply the detergent to the surface to be cleaned by using a brush or low-pressure spray garden sprayer. Let it act for around 10 minutes. Enhance the cleaning effect by brushing.
The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed. Rinse the surface thoroughly with clean water. When using a pressure washer avoid excessive wetting of the wooden structures, such as weatherboards and outer walls.
RENSA SUPER is environmentally friendly and biodegradable. It meets the requirements by OECD and by the Detergent regulation of European
Parliament and the Council on detergents for biodegradability (OECD 301B, EC 648 / 2004).
|Suitable Substrates:||On all paint and constructional surfaces, which endure cleaning with water|
|Application Method:||Sponge or cleaning cloth|
|Theoretical Coverage:||20 m² / 1 l detergent.|
|Packaging:||Available in 1 Litre and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.