Teknos Teknocryl Aqua 2940

SKU
ID20291
Non Hazardous
An air drying, water borne topcoat for direct adhesion onto most powder coated surfaces and ABS and polystyrene plastic.
Available in 3 and 10 Litres
From £49.02 £40.85
In stock
Only %1 left
Product Description

Please note, there is a 3 week lead time on this product for delivery.

Teknos Teknocryl Aqua 2940 is an air drying, water borne topcoat for direct adhesion onto most powder coated surfaces and ABS and polystyrene plastic.

Best Uses

Teknos Teknocryl Aqua 2940 is a resistant to oil and water coating for electrophoresis powder coated surfaces and certain plastics. An ideal product as a cosmetic coating for previously powder coated surfaces such as frameworks or chassis.

Application

The substrate must be free from grease, rust and mill scale. In a repair on top of earlier treated surfaces, we recommend a slight grinding. Adhesion and any attack at the painted surface should be tested before final coating of the surface. The surface to be painted must be dry. When coating and curing, the temperature of the air, paint and surface must be above 15°C and the relative air humidity below 70%.

Apply using air spraying equipment. Adhesion to the substrate should be tested before production, as different varieties may occur depending on the type of substrate / plastic.

Technical Details
Components: One Part
Type: Water Borne
Finish: 60% Gloss
Stock Colours: RAL 1011, RAL 8015, RAL 9010, NCS 4040-Y-40R
Tintable: No
VOC Content: 64.0g per Litre
Volume Solids: 44%
Suitable Substrates: For powder coated surfaces, ABS and PS plastics
Application Method: Air Spray
Theoretical Coverage: 14 m2 per litre
Wet Film Thickness (WFT): 70 microns
Dry Film Thickness (DFT): 30 microns
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 23°C
Overcoatable:  
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life:  
Packaging: Available in 3 and 10 Litres

Related Products