Mapei Elastocolor Pittura Paint

SKU
id10249
Non Hazardous
Based on acrylic resins in water dispersion used to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere.
Available in 20 Kg. Tintable to over 15,000 colours
From £199.15 £165.96
In stock
Only %1 left
Product Description

Mapei Elastocolor Pittura Paint is a protective and decorative elastic paint based on acrylic resins in water dispersion used to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere.

Available in 15,000 colours from the Mapei ColorMap colour system.

Best Uses

Elastocolor Pittura Paint once dried, forms a very elastic film, impermeable to water, but permeable to vapour (micro-porous), and at the same time gives the treated structure a pleasant aesthetic appearance. Due to its elastic characteristics it is suitable for application to Resitex used on Park Homes, Elastocolor protects and waterproofs concrete structures and renders which have hair-line cracks present as it forms a bridge over them with a strong and continuous coat. Use to protect the surfaces of concrete and cement renders from aggressive agents present in the atmosphere. Mapei Elastocolor is available in a vast range of colours that can be obtained with the ColorMap colour system.

Elastocolor Paint is a single component acrylic resin-based paint in water dispersion which forms a film on the surface due to the action of natural light. Once completely dry, Elastocolor Paint forms a flexible finishing coat which is impermeable to water and aggressive agents in the atmosphere (CO2 - SO2), while remaining permeable to vapour. Suitable for anti carbonation use.

Elastocolor Pittura Paint has excellent resistance to ageing, freezing weather conditions and de-icing salts, and the photo-chemical film which forms makes it very difficult for dirt to remain attached to the surface.

Mapei Elastocolor Paint meets the main requirements of EN 1504-9 ('Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems'),and the requirements of EN 1504-2 ('Protection systems for concrete surfaces') for class: products for protecting surfaces coatings (coating, C) - protection against the risk of penetration (1.3) (protection against ingress, PI) (ZA.1d) + control of humidity (2.2) (moisture control, MC), and increase in resistivity (8.2) (increasing resistivity, IR) (ZA.1e).

Application

Elastocolor is applied by brush, roller or spray in 2 or 3 coats onto perfectly clean and dry substrates which have been previously treated with Elastocolor Primer or Malech depending on the absorbency of the substrate.

Technical Details
Components: Single Pack
Type: Acrylic Resin in Water Dispersion
Finish:  
Stock Colours: White
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: < 20 g/L
Volume Solids: 63%
Suitable Substrates: Concrete facades and structures
Application Method: Brush, Roller or Spray
Theoretical Coverage: 0.2 - 0.4 kg per m2
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Surface Dry:  
Overcoatable: 12 - 24 hours at 20°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 20 Kg

Related Products