Teknos Woodex Aqua Classic

SKU
ID17721
Non Hazardous
A water-borne, oil-based, non-film-forming transparent wood stain for outdoor use.
Available in 2.7 and 9 Litres
From £32.14 £26.78
In stock
Only %1 left
Product Description

Teknos Woodex Aqua Classic is a water-borne, oil-based, non-film-forming transparent wood stain for exterior use. Protects wooden surfaces from moisture, soiling & when tinted protects from UV fading. Recommended especially for log cabins, wooden offices etc.

Best Uses

Teknos Woodex Aqua Classic is ideal for the staining of external wood such as fencing, garden furniture, cladding, pergolas and more. Woodex Aqua Classic is suitable for new wood and wood previously treated with non film-forming wood stain, e.g. walls, doors, window frames, fences and poles.

Teknos Woodex Aqua Classic is recommended especially for log cabins, wooden offices or outhouses.

Important note: this product is not suitable for use on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. It is not recommended to use Woodex Aqua Classic untinted since tinting protects wood from turning grey due to UV radiation of the sun.

  • Suitable for decking
  • Tintable to over thousand colours

Application

Remove all loose matter, dirt and dust with wire-brush, scrubbing brush or scraper. For untreated wood priming with Teknos Woodex Aqua Base is recommended. Allow to dry for one day. Wash dirty and/or mildewed surfaces with Teknos Rensa Facade facade cleaner. Rinse the surfaces thoroughly with water and allow to dry.

Stir Teknos Woodex Aqua Classic thoroughly before use. Reserve a sufficient amount of wood stain in the same vessel for each uniform surface, to avoid colour differences. The wood stain must also be stirred now and then in the course of work. Apply Teknos Woodex Aqua Classic by brush or spray. Coat untreated wood once or twice with Teknos Woodex Aqua Classic depending on the colour intensity and the required result. The wood stain is applied evenly and continuously on the whole length of the beam or timber to avoid making restart points. Treat end grain with special care. Brush application is recommended for the first coat. When spray is used, the surface is finished by smoothing with a brush.

It is not recommended that clear wood stain is used alone. Maintenance painting for wooden surfaces treated with Teknos Woodex Aqua Classic may be made with Teknos's water and solvent-based wood stains as well as with house paints.

Technical Details
Components: One Part
Type: Water Based
Finish: The product penetrates into the pores of the timber
Stock Colours: See above Colourcard. Translucent colours depend on below wood colour / texture
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 130.0g per Litre
Volume Solids: 23%
Suitable Substrates: For external wood
Application Method: Brush, Spray
Theoretical Coverage:
  • Sawn Timber: 5 - 8 m2 per litre
  • Planed Timber and Beam: 8 - 12 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: After 16 hours at 23°C
Fully Cured: -
Cleaner / Thinner: To be used undiluted. Wash the equipment immediately after work with warm water and detergent.
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 2.7 and 9 Litres

Related Products