Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Rust-Oleum Pegagraff Hydro Cleaner is a colourless cleaner for the removal of graffiti from marble, smooth concrete, metal and non-porous materials.
Rust-Oleum Pegagraff Hydro Cleaner is a colourless cleaner that quickly removes graffiti from substrates coated in Rust-Oleum Pegagraff Hydro. The Pegagraff system provides a tool for the fight against the problem of damage by graffiti.
Rust-Oleum Pegagraff Hydro Cleaner provides an active tool for the quick removal of most graffiti, on substrates which have been pre-treated with Pegagraff Hydro. The application of this product onto a painted substrate, isn't advised, unless the surface has been protected with Pegagraff Hydro. Pegagraff Hydro Cleaner isn't aggressive to substrates, but is dangerous for old, unprotected paints.
Pegagraff Hydro Cleaner must be used in a well ventilated area. It should be mixed well, before application. Pegagraff Hydro Cleaner can be applied with a brush and should be left to stand for up to 3 minutes, before attempting to remove the graffiti. For standard surfaces, this will mean wiping away with a soft brush and for structured substrates, use a hard nylon brush (this is the preferred method). A second application may be needed. Please see the data sheets for more information.
Surface and Environment
Pegagraff Hydro Cleaner can be used on marble, smooth concrete, metal, non porous materials, brick, cement render and plaster. It is not advisable to apply Pegagraff Hydro Cleaner to painted surfaces that are not protected with an anti-graffiti coating.
- Rust-Oleum Pegagraff Hydro Cleaner will clean graffiti from non-painted substrates
- For use on marble, smooth concrete, metal and non-porous materials
- Should not be applied to painted surfaces without an anti-graffiti protective coating
|VOC Level:||20 g/l|
|Volume Solids:||± 40 %|
|Suitable Substrates:||In principle direct application on ALL painted substrates is allowed, with exception of elastomeric coatings|
|Application Method:||Brush, Roller, Airless Spray or Air-Atomised Spray|
|Theoretical Coverage:||5 - 8 m²/l|
|Wet Film Thickness (WFT):||125 μm|
|Dry Film Thickness (DFT):||50 μm|
|Pot Life:||2 hours at 20°C|
|Touch Dry:||2 hours at 20°C|
|Dry to Handle:||After 4 hours at 20°C|
|Dry to Recoat:||After 5 hours at 20°C|
|Cleaner / Thinner:||Do not Dilute. Clean equipment with water|
|Shelf Life:||1 yearsfrom date of production unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.