Rustoleum Mathys Pegaprim Xpress Primer

SKU
id3531
Non Hazardous
A water based stain block primer suitable for obliterating tar, water stains, soot and graffiti.
Available in 1 and 5 Litres in White
From £19.87 £16.56
In stock
Only %1 left
Product Description

Rustoleum Mathys Pegaprim Xpress Primer is designed for use inside and outside to offer excellent adhesion to metal and porous substrates such as, concrete, wood, fibreboards, masonry and plaster rendering.

Rustoleum Mathys Pegaprim Xpress Primer is part of Promain's fantastic anti graffiti paint range that works well to block stains and provide a protective coating that obliterates tar, soot and graffiti. Rustoleum Mathys Pegaprim Xpress Primer offers users excellent drying time of just 30 minutes and can be recoated after just 1 hour.

Best Uses

Rustoleum Mathys Pegaprim Xpress Primer is best used as a protective undercoat that can be used with any topcoat, and solidifies and adheres to most surfaces including, metal, PVC, plastic and wood. Rustoleum Mathys Pegaprim Xpress Primer works as a strong, stain block paint that can act as an anti graffiti paint primer. Pegaprim Xpress offers excellent adhesion to metal (steel, zinc, aluminium, galvanised steel) and on smooth hard surfaces (PVC, polyester, Formica). Closes porous substrates such as masonry and plaster rendering.

Application

Rustoleum Mathys Pegaprim Xpress Primer is available in white and dries to a satin gloss finish with a theoretical coverage rate of 10m2 per litre per coat. This coverage rate will go down on more porous surfaces.

Surface and Environment

Rustoleum Mathys Pegaprim Xpress Primer is designed for use inside and outside to offer excellent adhesion to metal and porous substrates such as, concrete, wood, fibreboards, masonry and plaster rendering.

Technical Details
Components: One Part
Type: Universal adhesion primer based on water borne acrylic resins
Finish: Satin
Stock Colours: 1 White
Tintable: No
VOC Content: 40.0g per Litre
Volume Solids: 39%
Suitable Substrates: For inside and outside. Adhesion on metal (steel, zinc, aluminium, galvanised steel) and on smooth hard surfaces
(PVC, polyester, Formica). Closes porous substrates (masonry, plaster rendering, concrete, wood, fibreboards).
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: After 1 hour at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 1 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use