Osmo UV Protection Oil Tints

Osmo UV Protection Oil Tints

SKU id14005 Non Hazardous
Allows for an even colouring and a harmonic, smooth surface result on interior woods.
Available in 750ml and 2.5 Litres
£52.97 (£63.56 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£52.97 (£63.56 Inc VAT)

Product Description

Promain In Partnership With Check A Trade

Osmo UV Protection Oil Tints is based on natural raw vegetable oils formulated to allow for an even colouring and a harmonic, smooth surface result on interior woods.

Lightly pigmented and satin, natural oil-based and microporous finish which does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage. External elements of weathering fade the natural colour of the wood to a grey patina over time - Osmo UV Protection Oil Tints has been developed to resist against this, whilst adding a tinted colour of your choice to the wood's natural appearance. Ideal for windows, doors, cladding, fencing and other vertically structured joinery to block the greying process of the wood by a UV-protected factor of 12 in comparison to untreated wood.

Best Uses

Osmo UV Protection Oil Tints is ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements). Also suitable for bamboo poles (e.g. in screens).

  • Very water and dirt resistant
  • Reduces wood swelling and shrinkage
  • Resists growth of algae, mildew and fungal
  • Microporous, breathable finish which does not crack, peel, flake or blister
  • No sanding necessary for future applications

Application

Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo UV Protection Oil Tints is ready to use, please do not thin. Stir well before use.
If possible, please apply first coat to all sides before installation. For renovation works, clean old microporous stains thoroughly – if necessary sand lightly. Clean and restore already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Do not sand smooth surfaces finer than grit P120. The finished surface is influenced by several factors,
including the natural characteristics of wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Fresh, especially hardwood rich in extractives needs to weather off for approximately 6 weeks after installation. Thereby the wood becomes absorbent and the oil finish adheres optimally. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Depending on the degree of weathering, apply one coat of Osmo UV-Protection-Oil Tints to the cleaned and intact finish after approx. 2-3 years. To achieve the UV protection factor 12, it is necessary to apply 2 coats of Osmo UV-Protection-Oil Tints.

Recommended Products To Use


Osmo Brush Cleaner and Thinner, 1 Litre

Osmo Brush Cleaner and Thinner, 1 Litre

Ideal for cleaning of painting utensils after applying Osmo wood finishes.

£6.66 (£7.99 Inc VAT)
Osmo Maintenance Kit For Floors

Osmo Maintenance Kit For Floors

A cost effective Wooden Floor Cleaning Kit which is used to remove dirt, stains and shoe marks from wooden flooring.

£23.44 (£28.13 Inc VAT)
Osmo Polyx® Oil Original

Osmo Polyx® Oil Original

Provides the most hardwearing and durable protection for wooden flooring and furniture.

From £21.46 (£25.75 Inc VAT)