PPG Nexa Autocolor P498 Line EHS Turbo Plus Basecoat

SKU id16536 UN1263 (Class: 3, Pk Grp: III)
A versatile 2-pack acrylic paint system designed exclusively for painting commercial vehicles and for PPG Rail systems for passenger vehicles.
Available in 3.5 and 5 Litres depending on colour
£139.13 (£166.96 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£139.13 (£166.96 Inc VAT)

Product Description

PPG Nexa Autocolor P498 Line EHS Turbo Plus is a versatile 2-pack acrylic paint system designed exclusively for painting commercial vehicles and for PPG Rail systems for passenger vehicles.

Best Uses

PPG Nexa Autocolor P498 Line EHS Turbo Plus gives a finish of outstanding gloss and durability, which fully meets the highest standards demanded by fleet operators today. In ready-for-use mode, the VOC content of this product is lower than 420 g/l. Suitable for painting plastics.

For professional use only. Suitable for the following PPG Systems:

PPG2006001 - For interior and exterior vertical surfaces, interior horizontal supine surfaces and exterior horizontal prone surfaces.

PPG2007003 - For interior and exterior vertical surfaces, interior horizontal supine surfaces and exterior horizontal prone surfaces.

Application

Suitable for application via HVLP and conventional sprayer. All pigmented paint products should be thoroughly hand-stirred when opened. In addition mixing basics
should be stirred for 10 minutes by machine before use. Thereafter mixing basics should be machine stirred twice a day for a maximum of 10 minutes each time.

Original finish in sound condition, works primer. Fresh Turbo Plus (overnight dried/stoved) Fastbuild™ P540-line, P540-51* Build Primer 2, HS Wet-on-Wet primer P565-897, Epoxy primers P580-line, Transparent Sealer P565-755, Repaint Undercoat P595-line, Primecoat P565-625, Chromate Free etch primer P565-767, P565-1027/28. Where flatting is required the following grades of flatting paper are recommended : Wet or Dry paper : P600 - P800, Dry machine sanding : P280 - P320. For optimum appearance and holdout EHS Turbo Plus is best applied over 2-pack primers. For more detailed information on the preparation of specific substrates, see “Preparation and Pretreatment” PDS Q0100.

To reduce drying times P275-455 EHS Turbo Plus Rapide catalyst can be used in combination with the activated and thinned EHS Turbo Plus System. Please refer to the EHS Rapide Catalyst PDS W1200V for more information.

Apply 2 – 3 normal coats to get full opacity. Allow each coat to dry thoroughly before applying the next. After the final full coat, apply a light control coat to obtain an even degree of mattness across the surface. Do NOT exceed the stated maximum level of P565-9870 addition.

HVLP
The most suitable HVLP gun for the application of Commercial Transport products is the pressure feed system. (if long pressure lines are used, pressure will need to be increased) Air Cap Pressure : 0.675 bar (10psi) Max, Paint Pressure : 0.3-1.0 bar (5-15 psi)

PAINTING PLASTICS
Flexible Additive for Plastics (P100-2020) should be added to EHS Turbo Plus topcoat (P498-, P494-), when it is used over flexible plastic substrates.
To paint flexible substrates, apply a suitable Nexa Autocolor Primer. Please refer to PDS Plastics Painting Systems for more information. The primed plastic can be topcoated with EHS Turbo Plus mixed with P100-2020. If extra build is required apply the appropriate Nexa Autocolor 2-pack undercoat mixed with P100-2020 (please refer to the Flexible Additive PDS W1100V for more information) prior to EHS Turbo Plus topcoat.

P100-2020 should be added to EHS Turbo Plus in the following ratios:
Rigid Plastics - Use standard EHS Turbo Plus at the required gloss level.
Flexible Plastics - Mixing ratio: EHS Turbo Plus 5 parts P100-2020 1 part. AFTER adding P100-2020 activate and thin in the normal way.
Very Flexible Plastics - Mixing ratio: EHS Turbo Plus 2 parts P100-2020 1 part. AFTER adding P100-2020 activate and thin at 4 : 1 : 1

Recommended Products To Use


PPG Nexa Autocolor P852-1792 EHS Medium Thinner

PPG Nexa Autocolor P852-1792 EHS Medium Thinner

A compatible thinner for PPG Nexa Autocolor paints.

£27.90 (£33.48 Inc VAT)
PPG Nexa Autocolor P210-982 EHS Medium Hardener

PPG Nexa Autocolor P210-982 EHS Medium Hardener

A compatible hardener for PPG Nexa Autocolor paints.

£40.33 (£48.40 Inc VAT)