PPG SigmaGuard 795 is a two component high build amine adduct cured phenolic epoxy coating, that works to repair and maintain high chemical resistant epoxy tank linings like SigmaGuard 720 and Phenguard.
PPG SigmaGuard 795 is designed to offer a high level of chemical resistance and adhesion to the linings of tanks and provides an excellent solution for spot repairs. Please see the technical data sheet on this product for more information on where and how best to use this product.
PPG SigmaGuard 795 provides a fast curing solution with excellent flow and handling, that can be easily applied using a brush or roller. 2 coats of 795 must be applied to ensure the optimum results. The first coat will be touch dry after just 2 hours and an interval of 14 hours should be allowed before applying your second coating.
Surface and Environment
PPG SigmaGuard 795 is protective grey/green product that can be applied to tank linings to offer excellent adhesion to abraded steel and other coated surfaces. Not only does 795 provide high protection but offers a quality level of decoration to match that of your tank exterior.
- To repair and maintain chemical resistant epoxy amine cured tank linings like SigmaGuard 720 and Phenguard
- Designed for spot repair
- Excellent adhesion to abraded steel and coating surface
- Good chemical resistance
- Easy to handle
- Fast curing
|Type:||Amine Adduct Cured Phenolic Epoxy|
|VOC Content:||273.0g per Litre|
|Suitable Substrates:||For stripe coating Phenguard tanking systems or to repair and maintain tank linings such as SigmaGuard 720 or Phenguard|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||7.5m2 per litre at 100 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||75 - 150 microns|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||Minimum of 14 hours at 20°C|
|Cleaner / Thinner:||PPG Thinner 91-92|
|Shelf Life:||At least 12 months when stored cool and dry|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.