PPG SigmaZinc 102 HS Polyamide Zinc Epoxy is a two component high solids zinc epoxy primer and or buildcoat.
PPG SigmaZinc 102 HS Polyamide Zinc Epoxy is a two component high solids polyamide cured zinc epoxy primer designed for priming systems with high solids epoxy build coats.
PPG SigmaZinc 102 HS Polyamide Zinc Epoxy is primarily used as an undercoating that be be painted over with a variety of different Zinc Epoxy Topcoats and offers excellent corrosion preventing properties with quick drying times that can be overcoated in short intervals.
PPG SigmaZinc 102 HS Polyamide Zinc Epoxy can be applied using brush, roller or airless spray and offers an ultra fast drying time of just 2 hours at 20 degrees celsius, that can be overcoated after just 6 hours. SigmaZinc 102 HS Zinc Epoxy Primer has a theoretical coverage rate of 11m2 per litre and when dry produces a flat grey finish.
Surface and Environment
PPG SigmaZinc 102 HS Polyamide Zinc Epoxy is suitable for use on steel and blasted steel in a variety of different environments including, industrial, construction and commercial and works to prevent a whole host of different steel structures and appliances from corrosion and water damage.
- Very good primer for systems with high solids epoxy buildcoats
- Can also be used as a system primer for various other paint systems
- Good anti-corrosive properties
- Quick drying, can be overcoated after a short interval
- Complies with SSPC-Paint 20
|Stock Colours:||Redbrown, Grey|
|VOC Content:||286.0 g/l|
|Volume Solids:||66 +/- 2%|
|Application Method:||Brush, Roller, Airless Spray or Air Spray|
|Theoretical Coverage:||11.0 m2 per litre at 60 microns|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||60 - 150 microns (2.4 - 6.0 mils) depending on system|
|Pot Life:||8 hours at 20°C|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After minimum 6 hours to maximum 3 months at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Thinner 91-92, Clean with Thinner 90-53|
|Shelf Life:||24 months when stored cool and dry|
|Packaging:||Available in 8 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.