PPG SigmaZinc 109 *CLEARANCE*

SKU id3974 Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two component zinc rich polyamide.
Available in 8 Litres in Grey
£52.50 (£63.00 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£52.50 (£63.00 Inc VAT)

Product Description

This product has been discontinued by PPG, however we have a small supply of stock available in Grey.

Please see PPG SigmaZinc 109HS or call our technical team on 01462 421333 for alternatives.

PPG SigmaZinc 109 is a two component zinc rich polyamide Can also serve as a holding primer for various maintenance systems when a short overcoating interval is required.

Best Uses

PPG SigmaZinc 109 is primarily used as an undercoating that be be painted over with a variety of different Zinc Epoxy Topcoats and offers excellent corrosion preventing properties with quick drying times that can be overcoated in short intervals


PPG SigmaZinc 109 can be applied using brush, roller or airless spray and offers an ultra fast drying time of just 10 minutes at 20°C, that can be overcoated after just 6 hours. SigmaZinc 109 Zinc Rich Epoxy Primer has a theoretical coverage rate of 11-12m2 per litre and when dry produces a flat grey finish.

Surface and Environment

PPG SigmaZinc 109 is suitable for use on steel and blasted steel in a variety of different environments including, industrial, construction and commercial and works to prevent a whole host of different steel structures and appliances from corrosion and water damage.