This product is now discontinued. Please contact our technical team for a suitable alternative.
PPG SigmaZinc 11 is a single pack inorganic zinc silicate used in heavy industrial and construction environment and has been formulated to protect the surface from dry heat of up to 400 degrees Celsius.
PPG SigmaZinc 11 (Dimetcote 11) is a grey, one component, inorganic, zinc silicate coating designed to provide users with quick drying properties that can be recoated quickly after a short interval, and has good anti corrosive properties suitable for use on metal substrates.
PPG SigmaZinc 11 is most effective when used on steel or blasted steel, to produce a grey flat finish that looks great on the eye while doing its utmost to protect the surface from natural atmospheric conditions, internally or externally.
PPG SigmaZinc 11 can be applied using brush, roller or spray and is dry to touch after just 4 minutes at 20 degrees Celsius. After 16 hours your surface will be ready for an overcoating that offers a theoretical coverage rate of 8.9m2 per litre.
Surface and Environment
PPG SigmaZinc 11 can be used in heavy industrial and construction environment where there is an element of heat concern, and this product works well at protecting the surface from dry heat of up to 400 degrees Celsius.
- PPG SigmaZinc 11 is available in grey
- One component inorganic zinc silicate coating
- Single pack zinc silicate
- Good anticorrosive properties
- Dry heat resistance up to 400 degrees C.
- Quick drying, can be overcoated after a short interval
- Available in 8 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.